How do i create a 2d thread in autocad?

How do you make a 2d coil in AutoCAD?

A helix is an open 2D or 3D spiral.

  1. Click Home tab Draw panel Helix. Find.
  2. Specify the center point for the base of the helix.
  3. Specify the base radius.
  4. Specify the top radius or press Enter to specify the same value as the base radius.
  5. Specify the height of the helix.

How do you create a thread in AutoCAD?

To Insert a Thread on a Shaft (AutoCAD Mechanical Toolset)

  1. In the Shaft Generator dialog box, select the Thread option.
  2. In the Thread Selection dialog box, select the thread type to be inserted.
  3. In the corresponding dialog box, you can specify the geometrical values for the section.

How do I show 2d threads in AutoCAD?

To Specify the Thread Style for Drawing Views

  1. Click Layout tab Styles and Standards panel Dialog box launcher. Find.
  2. In the Drafting Standards dialog box, in the Thread style section, click the desired thread style.

How do you make a 2d ramp in AutoCAD?

To Create a Ramp

  1. Import the ramp style from the Stair Styles drawing.
  2. Open the tool palette that you want to use, and select a stair tool. …
  3. On the Properties palette, expand Basic General.
  4. Select the Ramp-Concrete style.
  5. Specify stair settings, such as shape, turn type, and so on.
  6. Specify the location of the stair.
IT IS INTERESTING:  How do you select all lines in autocad?

How do you make a screw in AutoCAD?

Tutorial: Draw a 3D threaded bolt

  1. Start a new drawing using acad3d. …
  2. Type plan to see the view from the top.
  3. Create a new layer, object, and make it blue.
  4. Start the POLYLINE command, specify a start point anywhere in the middle of the screen, and draw segments as follows: …
  5. Start the REVOLVE command and select the polyline.

How do you insert a nut in AutoCAD?

Help

  1. Click Content tab Library panel Content Libraries. …
  2. In the Content panel, locate the screw to insert. …
  3. In the Details panel, click Top View.
  4. In the drawing area, specify the insertion point for the screw.
  5. On the command line, specify the rotation angle or press Enter to accept the default (zero).

How do you make a hexagonal nut in AutoCAD 2d?

specify center of the circle at center of the polygon. Type 0,0 [Enter]. Specify radius of the circle to 0.125. Type 0.125 [Enter].

How to draw hexagon bolt

  1. Open a new drawing. …
  2. Make sure Ortho mode is OFF, (it ON when it glow in blue, OFF in grey)
  3. Type z [Space bar], type e [Space bar].

How do you create a thread in Inventor?

To Create Threads

  1. Click 3D Model tab Modify panel Thread .
  2. In the graphics window, select a face for the thread location. …
  3. Set the Thread Length: …
  4. Click the Specification tab to set the thread type using predefined types from the Thread data spreadsheet: …
  5. Click OK.

How do you make a hexagonal nut in AutoCAD?

Tutorial – Making a Hex Nut in AutoCAD 2004?

  1. Start AutoCAD.
  2. Make a Polygon using polygon command with 6 side center at 0,0 circumscribed in a circle of radius 36mm.
  3. Make a circle at origin of radius 20mm.
  4. Use region command and select all and then press enter. …
  5. Views>>3D Views>SE Isometric.
IT IS INTERESTING:  How do you make a midpoint snap in autocad?
Special Project