How do i create an auxiliary view in autocad?

How do I get an auxiliary view?

To sketch an auxiliary view, you begin with orthographic. views of the object and add projection lines perpendicular (90◦) to the slanted surface, adding a reference line any convenient distance from the view with the slanted surface.

What is the minimum amount of views required to create an auxiliary view?

two

Why do you need an auxiliary view?

An auxiliary view is a projection on an auxiliary plane that is parallel to an inclined (slanting) surface. … Auxiliary projections are important for describing the true geometric shapes of inclined surfaces. You also use them for dimensioning these shapes.

How do I create a section in AutoCAD?

Help

  1. Click Layout tab Create View panel Section drop-down Full. …
  2. Click the view you want to use as the parent view. …
  3. Click in the drawing area to indicate the start point of the section line. …
  4. Click in the drawing area to indicate the end point of the section line.
IT IS INTERESTING:  What is autocad p&id?

What are the six types of auxiliary views?

Auxiliary views are used to find: 1) true length of an inclined or oblique line; 2) true size and shape (TSS) of an inclined or oblique face 3) edge view of oblique face; 4) point view of inclined or oblique line; 5) true size and shape of features on incline or oblique faces.

What is the difference between primary and secondary auxiliary views?

A primary auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection and is inclined to the other two. A secondary auxiliary view is projected from a primary auxiliary view onto a plane that is inclined to all three principal projection planes.

How do you draw primary auxiliary view?

To Draw an Auxiliary View

  1. Draw the model with a slanted surface shown in Figure 4-58.
  2. Start a new drawing using the Drawing format and create orthographic views of the model. …
  3. Click the View Layout tab, then click the Auxiliary View tool.
  4. Click the slanted edge line in the front view.

In what situation would an auxiliary view be used?

Auxiliary views are normally used to view the True Shape of a surface which does not face the Front Elevation, End Elevation or Plan at 90o.

What is a secondary auxiliary view?

The secondary auxiliary view is a projection from the primary auxiliary view onto a plane perpendicular to the true length edges. In this view, the sides and bottom of the groove appear as edges, as if you are looking into the end of the groove.

IT IS INTERESTING:  What is purpose of f8 in autocad?

What is the difference between a complete auxiliary view and a partial auxiliary view?

What is the difference between a complete auxiliary view and a partial auxiliary view? Complete auxiliary views show all of the part. Partial auxiliary views show only that information which adds to the description of the part. It is characterized by a break line, to eliminate unnecessary information.

What is an auxiliary plan?

The auxiliary plan view is a true view on the tilted box. If a view is now taken in the direction of arrow Y, the tilted box will be turned through 90° in the direction of the arrow, and dimension 1 to the corner will lie parallel with the plane of the paper.

What is section view AutoCAD?

A model documentation section view is a projected view from an existing drawing view, where you use a section line to cut through the drawing view in order to reveal what is inside.

Special Project