How do I hide a selection box in AutoCAD?

For Windows versions of AutoCAD/AutoCAD LT, type OP or OPTIONS to bring up the Options dialog. In the Options, go to the Selection tab and uncheck the lasso feature, shown in the screenshot below.

How do you hide a selection in AutoCAD?

To hide objects

  1. Select the objects in the drawing that you want to hide.
  2. Right-click, and click Isolate Objects Hide Selected Objects. Alternatively, you can click on the right side of the drawing window status bar, then click Hide Objects, and select the objects you want to hide.

How do I change a selection box in AutoCAD?

To Change Object Selection Settings

  1. Right-click in the drawing area, and choose Options.
  2. On the Selection tab, choose the settings you want. Among other settings, you can set. Whether objects to be selected are previewed during selection. Whether selected objects are highlighted.

How do you hide an isolate layer in AutoCAD?

AutoCAD tip: Layer Isolate Settings

  1. Begin the LAYISO command.
  2. Before you click anything look at the command line.
  3. Select the “Settings” option.
  4. By default the “Lock and fade” options is set. Select the “Off” setting.
  5. Verify the “Off” setting is also set for the paper space viewport option.
  6. Continue to use the command as you normally would.
IT IS INTERESTING:  Frequent question: How do i uninstall autodesk 360?

How do you remove objects from a selection set?

Deselect Objects from Selection Set

  1. After making a selection set,
  2. Hold the SHIFT button while you select the objects that are to be removed from the selection set.
  3. Note: You can the common selection methods: Pick, Window, or Crossing Window.

How do you show all objects in AutoCAD?

To Display all Boundary Objects in the Drawing Area

  1. Zoom in the drawing area until all desired spaces are visible.
  2. Click Home tab Inquiry panel Show Space Boundaries.
  3. Select one of the following options: If you want to. Then. see boundary objects and associative spaces. press Enter. Note: The view includes boundary objects on frozen, hidden, and locked layers.

How do I fix selection in AutoCAD?

To Change Object Selection Settings

  1. Right-click in the drawing area, and choose Options.
  2. On the Selection tab, choose the settings you want. Among other settings, you can set. Whether objects to be selected are previewed during selection. Whether selected objects are highlighted.

How do you do rectangular selection in AutoCAD?

Select objects by clicking them or by using a window or crossing method.

  1. To specify a rectangular selection area, click and release the mouse button, move the cursor, and click again.
  2. To create a lasso selection, click, drag, and release the mouse button.

How do I turn on selection cycling in AutoCAD?

Selection cycling allows you to select objects that are overlapping by pressing Shift + Spacebar.

How do I change the color of a selection in AutoCAD?

To Change the Color of Selected Objects

  1. Select the objects whose color you want to change.
  2. Right-click in the drawing area, and choose Properties.
  3. In the Properties palette, click Color, and then click the down arrow. From the drop-down list, choose the color that you want to assign to the objects.
  4. Press Esc to remove the selection.
IT IS INTERESTING:  How do i set inches in autocad?

How do I enable multiple selections in AutoCAD?

To enable multiple selections by clicking them with the mouse:

  1. On the command line in AutoCAD, enter the PICKADD command.
  2. Enter 2 for the value.

What is lasso selection in AutoCAD?

The Lasso is similar to an Implied Windows Crossing Selection. When you select out in the drawing area (No Objects) you will get a Window when you pull down to the right and a Crossing windows when you pull down and to the left.

How do you isolate a layer?

The Isolate Layers command lives in the Select menu. In the Layers panel filter menu, choose “Selected” instead. Or Ctrl-click/right-click on an object to choose Isolate Layers from the context-sensitive menu.

When objects are isolated all other layers are turned off?

After selecting one or more objects, all layers except the layers of the selected objects are either turned off, frozen in the current layout viewport, or locked, depending on the current setting. The layers that remain visible and unlocked are termed isolated. Note: Locked layers are faded by default.

How do I change the isolate settings in Autocad?

To correct this, follow these steps:

  1. Start the Layer Isolate command.
  2. Enter S on the command line.
  3. Verify that the current setting is Lock and Fade.
  4. Enter O for Off.
  5. Modify the Viewport setting.
Special Project