How do you create a roof plan in Revit?

How do you change the slope of a roof in Revit?

Edit the roof sketch

  1. Select the roof, and click Modify | Roofs tab Mode panel (Edit Footprint) or (Edit Profile).
  2. Make necessary changes. …
  3. Click (Finish Edit Mode).

How do you show a roof on a floor plan?

Answer

  1. Open the plan view of the level in which you want to see the roof line.
  2. In the view properties, expand the Underlay drop-down and select the level on which the roof was created to display as an underlay. …
  3. Select the Linework tool in the View panel on the Home ribbon.

Where is linework tool in Revit?

Click Modify tab View panel (Linework).

How do you see the floor below in Revit?

Follow these steps:

  1. In plan view, click View menu > View Properties.
  2. Click the Edit button for the View Range parameter.
  3. Enter a value for both the Bottom Offset, under Primary Range, and the Level Offset, under View Depth, that is more than 4 feet from the floor or slab.

How does the roof by footprint tool work?

Creates a roof using the building footprint to define its boundaries. … If you choose not to move the roof to a different level, Revit notifies you later if the roof is too low. On the Draw panel, select a sketch or pick tool. To edit roof properties before sketching, use the Properties palette.

IT IS INTERESTING:  Can you import autocad into solidworks?

When modeling ceilings in Revit What are the two methods used?

Use the Ceiling tool to create a ceiling in a reflected ceiling plan view.

  • Open a ceiling plan view.
  • Click Architecture tab Build panel (Ceiling).
  • In the Type Selector, select a ceiling type.
  • Place a ceiling using one of the following methods: Use walls as ceiling boundaries.
Special Project