How do you cut a void wall in Revit?

How do you cut a void in Revit?

Cutting with voids in families when loaded

  1. Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters.
  2. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK.
  3. Load the family into the project and place it.

How do you cut a wall in Revit?

Cut a Rectangular Opening in a Wall

  1. Open an elevation or section view where you can access the wall that will host the opening.
  2. Click (Wall Opening). Where is it? …
  3. Select the wall that will host the opening.
  4. Sketch a rectangular opening. …
  5. To modify an opening, click Modify, and select the opening.

How do you cut an object in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

What does cut with voids when loaded mean?

The process of cutting a solid architectural element by a family that contains Void, by using ‘cut with a void when loaded’ Well, the main purpose of using ‘cut with the void when loaded’ parameter is to cut solid architectural elements when loaded in a project.

IT IS INTERESTING:  What are the job opportunities for an AutoCAD Operator?

How do you create a floor opening cut in Revit?

Cut an Opening in a Floor, Roof, or Ceiling

  1. Click By Face or Vertical. Where is it? Architecture tab Opening panel. Structure tab Opening panel. …
  2. If you chose By Face, select a face in the floor, ceiling, or roof. If you chose Vertical, select the entire element. Selected face for opening by face. …
  3. Click Finish Opening.

How do you create a wall sweep in Revit?

Help

  1. Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep).
  2. On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties.
  3. In the Type Properties dialog, for Profile, select the desired profile type.
  4. Click OK.

How do I create a sweep in Revit 2019?

Create a Sweep

  1. In the Family Editor, on the Create tab Forms panel, do one of the following. …
  2. Specify the sweep path: …
  3. On the Mode panel, click (Finish Edit Mode).
  4. Load or sketch a profile. …
  5. On the Properties palette, specify the sweep properties. …
  6. On the Mode panel, click (Finish Edit Mode).

How do you make a void family in Revit?

Create a Void Family with an Elliptic Profile

  1. Create a new family using the Metric Generic Model face based. …
  2. Select the 3D Front view.
  3. Click Create tab Datum panel (Reference Plane).
  4. Place a new horizontal reference plane in the middle of the slab extrusion:
  5. Select the new reference plane.
  6. In the Properties palette:

How do you cut a hole in a countertop in Revit?

After adding a void to the sink family, you need to open Family Category and Parameter window and check the [Cut with Void when loaded] box. Upon placing the sink to top of the countertop, use Cut command on the Modify menu to cut the hole. You can also nest the sink to the countertop family as well.

IT IS INTERESTING:  What does the explode command do in autocad?
Special Project