How do you make a chainage in autocad?

Click Home tab Draw panel Line drop-down Create Line Chainage/Offset . Select the alignment. Specify a chainage by either entering a chainage value or clicking in the drawing. Specify a distance by either entering an offset or clicking in the drawing.

How do you make a chainage in Civil 3d?

Alignment Chainage Control

  1. Click Alignment tab Modify panel Alignment Properties drop-down Alignment Properties . …
  2. In the Alignment Properties dialog box, click the Chainage Control tab.
  3. Under Reference Point, click . …
  4. In the drawing, pick a point where you want to establish the XY coordinates for the Reference Point.

How do you make a zigzag line in AutoCAD?

To Create a Zigzag Line (AutoCAD Mechanical)

  1. Click Home tab Draw panel Zigzag Line. Find.
  2. Specify the starting point for the zigzag line.
  3. Specify subsequent points.
  4. Press ENTER to specify the endpoint of the zigzag line and to end this command.

How do you draw a centerline in AutoCAD 2007?

To Create a Centerline Cross

  1. Click Home tab Draw panel Centerline drop-down Centerline Cross. Find.
  2. Press ENTER to display the Select Options for Centerlines dialog box, or specify a starting point for the centerline .
  3. Specify the center point of a hole.
  4. Specify a diameter value for the centerline cross or select a quadrant point.
  5. Press ENTER.
IT IS INTERESTING:  What is the function of osnap in autocad?

How do you create a road alignment in Civil 3d?


  1. Click Home tab Create Design panel Alignment drop-down Alignment Creation Tools Find.
  2. In the Create Alignment – Layout dialog box, enter a unique name for the alignment.
  3. Specify the alignment Type.
  4. Enter an optional description.
  5. Enter a starting station value.
  6. On the General tab, specify the following settings:

How do you create a road in Civil 3d?

General Workflow

  1. Create existing surface conditions. …
  2. Design alignment. …
  3. Apply design criteria. …
  4. Generate existing ground profile and design grades. …
  5. Construct assemblies. …
  6. Build the corridor. …
  7. Perform analysis of the resulting model. …
  8. Perform design optimization of the already analyzed model.

How do you read a road chainage?

The Point of Beginning of the line is usually denoted as 00+00 (The Starting Point) with stationing at least every 100 feet along the line denoted as 1+00 (for 100 feet)… 2+00 (for 200 feet)… 3+00 (for 300 feet), etc.

What is chainage in pipeline?

The word “chainage” as used today indicates the centerline of a linear structure, such as a road or pipeline. It’s used in conjunction with “elevation” and “offset” to draw up construction plans.

What is railway chainage?

The chainage is the distance measured along the railway line from its beginning point. The integers indicate 100 m, represented by a small circle on the line (the centre of the circle indicates the exact location of the integer section) and a legend with a number under the circle, parallel to the line.

What are line weights?

Line weight is the visual lightness, darkness, or heaviness of a line within a drawing. In any architectural drawing, from a sketch to a construction drawing, the interplay of different relative line weights is used to communicate depth, importance, and proximity.

IT IS INTERESTING:  How do I open a corrupt AutoCAD file?

How do I draw a line break in AutoCAD?

Here are the steps:

  1. Start a new drawing.
  2. Draw the breakline symbol:
  3. Make the Defpoints layer current. …
  4. Use the POINT command to create a point object at each location where the line will connect with the breakline symbol.

How many types of lines are there in AutoCAD?

When you first start AutoCAD, the default template has only one linetype is available. This is the continuous linetype. AutoCAD has many more available, but only loads in one to start with in order to keep the drawing file size smaller. If you need a different linetype, you must load it into your current drawing.

How do you draw a centerline in AutoCAD 2020?

Manually add a centerline

  1. On the ribbon, click Annotate tab Symbols panel Centerline .
  2. In the graphics window, click a feature to start the centerline.
  3. Click a second feature to add the centerline.
  4. Continue selecting features until all desired features are added. …
  5. Right-click, and then select Create to accept the displayed centerline.

How do I change the centerline in AutoCAD?

Click on a center mark or centerline to view and set general properties such as color, layer, linetype, linetype scale, plot style, lineweight, transparency, and so on. If you have added the center mark or centerline tools to a tool palette, then you can also change their properties in the Tool Properties dialog box.

How do you draw a midline in AutoCAD?

To Create a Centerline Between Two Lines (AutoCAD Mechanical)

  1. Click Home tab Draw panel Centerline drop-down Centerline In-between. Find.
  2. Select first contour line (1).
  3. Select second contour line (2).
  4. Press ENTER.
IT IS INTERESTING:  Quick Answer: Where is object snap in autocad?
Special Project