Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.
How do you show reference planes in Revit?
Reference planes display in each plan view that you create for a model. Use the Line tool or the Pick Line tool to draw a reference plane. Name each reference plane so you can assign it to be the current work plane. Hide a selected reference plane or all reference planes in a view.
How do you change a reference plane in Revit?
Select a work plane-based element in a view. Click Modify | <Element> tab Work Plane panel (Edit Work Plane).
In the Work Plane dialog, select another work plane.
- Name—Choose an available work plane from the list, and click OK. …
- Pick a plane—Revit creates a plane coincident to the selected plane.
How do you name a reference plane in Revit?
Name Reference Planes
- In the drawing area, select a reference plane.
- On the Properties palette, for Name, enter a name for the reference plane. Tip: Click directly on the text label for the reference plane and type a name for the reference plane.
Do reference planes print in Revit?
Reference planes, crop boundaries, and scope boxes are hidden for printing by default. … Click Print (Print Setup). In the Print Setup dialog, select Hide ref/work planes.
How do I create a reference level in Revit family?
- Open the section or elevation view to add levels to.
- On the ribbon, click (Level). Architecture tab Datum panel (Level) …
- Place the cursor in the drawing area and click. …
- Draw level lines by moving the cursor horizontally. …
- Click when the level line is the correct length.
Where is the reference line in Revit?
In the Family Editor, click Create tab Datum panel (Reference Line). Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection.
Where is Family Editor in Revit?
Select an instance of the family in the drawing area, and click Modify | <Element> tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.