Beneath each room label, you’ll see some numbers. This is the size of the room. So, for example, if the dining area is 10’4”x 8’2”, the room is ten feet, four inches wide and eight feet, two inches long. Usually, floor plan measurements are listed by width first and length second.
What do the numbers mean on a floor plan?
When reading the floor plans, you will probably notice a few circles with numbers and letters inside of them. These symbols are used to indicate a cross-section of that particular room or space that can be found elsewhere in the blueprints.
How do you read room dimensions?
For example, a dimension of a rectangular room on a blueprint, 14′ 11″ X 13′ 10″ equates to a room size of 14 feet, 11-inches wide by 13 feet, 10-inches long. Dimensions are expressed as width by length by height or depth in three-dimensional space.
What does T in a circle mean on floor plans?
A small circle bisected by two parallel lines is a wall outlet, while a circle superimposed over an X is a ceiling light and a T hanging from a circle is a thermostat.
What does C stand for on a floor plan?
House plan abbreviations
|CBD / CPD||Cupboard|
What does P stand for in floor plans?
What does P mean on floor plan? Commonly Used Abbreviations. W.I.C. – Walk in Closet. W/D – Washer and Dryer (if shown together as with the floorplan above, that indicated the appliances are stacked) P. – Pantry. …
What goes first width or length?
The Graphics’ industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width. That’s important. When you give us instructions to create an 8×4 foot banner, we’ll design a banner for you that is wide, not tall.
What are the features of the floor layout plan?
Floor plans typically feature:
- All of your living and working spaces. Your home building plans should indicate the location and setup of bedrooms, hallways, bathrooms, the kitchen, and the garage and/or basement.
- All of your room layouts. …
- Doors and windows. …
- Room features.