How do I create a sweep profile in Revit?

How can I create sweep profile?

To create a solid sweep, click (Sweep).



  1. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. …
  2. On the Options Bar, use the X, Y, Angle, and Flip options to adjust the position of the profile. …
  3. Click Apply.
  4. Select the path, and in a 3D view, zoom in to see the profile.

How do you create a sweep in Revit?

Create a Sweep Form

  1. Draw a series of connected lines to form a path.
  2. Click Create tab Draw panel (Point Element) and click along the path to place a reference point.
  3. Select the reference point. …
  4. Draw a closed profile on the work plane.
  5. Select the line and profile.
  6. Click Modify | Lines tab Form panel (Create Form).

What is a wall sweep?

Use the Sweep tool to add a baseboard, crown molding, or other type of decorative horizontal or vertical projection to a wall. You can add a wall sweep to a wall from a 3D or elevation view. To add a sweep for all walls of a type, modify the wall structure in the wall’s type properties.

How do I create a wall sweep in Revit 2020?

Click Architecture tab Build panel Wall drop-down (Wall: Sweep). In the Type Selector, select the desired type of wall sweep. Click Modify | Place Wall Sweep Placement panel, and select the orientation of the wall sweep: Horizontal or Vertical. Place the cursor over the wall to highlight the wall sweep location.

IT IS INTERESTING:  How do you make a 3D box in AutoCAD?

How do you create a sweep in Revit 2021?

Create a Sweep Form

  1. Draw a series of connected lines to form a path.
  2. Click Create tab Draw panel (Point Element) and click along the path to place a reference point.
  3. Select the reference point. …
  4. Draw a closed profile on the work plane.
  5. Select the line and profile.
  6. Click Modify | Lines tab Form panel (Create Form).

What are the two necessary elements to create a sweep?

Two elements are required to create a sweep surface: Trajectory—Curve or curves that guide the sweep. Cross-sectional sweep profile—Curve or curves that sweep along the trajectory. ◦ One or two trajectories can be used.

How do I edit a sweep profile in Revit?

To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab. On the Mode panel, click (Finish Edit Mode) to finish editing the profile and again to finish editing the sweep.

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

How do I import a profile into Revit?

Load or sketch a profile. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. If the profile you need is not already loaded in the project, click Modify | Sweep tab Sweep panel (Load Profile) to load the profile.

IT IS INTERESTING:  Where is Hatch area in AutoCAD?

How do you create a family profile?

Create a Google Account for your child

  1. Open the Family Link app. . If you don’t have the Family Link app, visit the Family Link setup page to get started.
  2. In the top right, tap Create .
  3. Follow the instructions on screen to create the account.
  4. When you’re done, a confirmation will show on the screen.

How do I create a mullion profile in Revit?

Specify the profile for a mullion type.

  1. In the drawing area, select a mullion on the model, or click Architecture tab Build panel (Mullion) on the ribbon.
  2. On the Properties palette, click Edit Type.
  3. In the Type Properties dialog, under Construction, select a profile, and click OK.
Special Project