How do I find reference planes in Revit?

What is reference planes in Revit?

Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.

How do you change a reference plane in Revit?

Select a work plane-based element in a view. Click Modify | <Element> tab Work Plane panel (Edit Work Plane).

In the Work Plane dialog, select another work plane.

  1. Name—Choose an available work plane from the list, and click OK. …
  2. Pick a plane—Revit creates a plane coincident to the selected plane.

Do reference planes print in Revit?

Reference planes, crop boundaries, and scope boxes are hidden for printing by default. … Click Print (Print Setup). In the Print Setup dialog, select Hide ref/work planes.

How do you create a reference plane in Revit 2020?

Add a Reference Plane

  1. On the Draw panel, click (Pick Lines).
  2. On the Options bar, specify an offset, if desired.
  3. Select the Lock option to lock the reference plane to the line.
  4. Move the cursor near the line to which you want to place the reference plane and click.
IT IS INTERESTING:  Quick Answer: Can I call myself an interior architect?

What is reference line?

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

How do I delete a reference plane in Revit?

The only way I’ve ever been able to get rid of them in your pull-down list of work-planes is to FIND the reference plane, pick it, then delete. It will automatically disappear from the list after this procedure.

How do you offset a reference plane in Revit?

Add a Reference Plane

  1. On the Draw panel, click (Pick Lines).
  2. On the Options bar, specify an offset, if desired.
  3. Select the Lock option to lock the reference plane to the line.
  4. Move the cursor near the line to which you want to place the reference plane and click.

Where is Family Editor in Revit?

Select an instance of the family in the drawing area, and click Modify | <Element> tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.

How do I create a reference level in Revit family?

Add Levels

  1. Open the section or elevation view to add levels to.
  2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
  3. Place the cursor in the drawing area and click. …
  4. Draw level lines by moving the cursor horizontally. …
  5. Click when the level line is the correct length.
IT IS INTERESTING:  How do you create a plane in AutoCAD?
Special Project