How do you cut structural framing in Revit?

What is structural framing in Revit?

Beam cutback is the visible representative gap in beam geometry at the connection point in join relationships. Specify Precut Display for a Family in a Plan View. Architectural columns, structural columns, and framing elements can display in a plan view using a specified cut plane in the plan view of the family.

Can you cut concrete floor beams?

While I have never had to cut a Beam & Block floor beam, I have cut many a number of Pre-stressed concrete Lintels without encountering any problems. In fact the cut lengths are actually stronger than what they were originally designed for.

How do you cut a beam in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the beam to be cut. Select the reference plane. If you move the wall or the beam, the cut will persist at the wall unless the beam is no longer joined with the wall.

How do you cut in Revit 2020?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do you cut a void wall in Revit?


  1. Edit the in place wall.
  2. Create a new void extrusion that will define the opening.
  3. Use the “Cut” tool and select the void geometry.
  4. Finish the solid edition.
IT IS INTERESTING:  How do I combine lines and arcs in AutoCAD?

Where is Geometry in Revit?

On the Modify ribbon, in the Geometry panel, click Join Geometry. Revit prompts you to select the solid geometry to be joined. Select the floor and then the wall on the left.

How do you load a structural framing family in Revit?


  1. Click Structure tab Structure panel Brace.
  2. Click Modify | Place Brace tab Mode panel Load Family.
  3. In the Open dialog, navigate to either the imperial or metric library, and open the Structural/Framing folder.
  4. Select a brace type folder: either Steel, Light Gauge Steel, Concrete, or Wood, and click Open.

How do you set structural framing in Revit?

On the Properties palette, select a structural connection from the Type Selector drop-down. Select the structural elements which comprise the join requiring a connection. Use a pick box or press and hold Ctrl to select multiple elements. Press Enter or Spacebar to place the connection.

How do you cut a rafter in Revit?

In the drawing area, select the roof. On the Properties palette, for Rafter Cut, select Plumb Cut, Two Cut – Plumb, or Two Cut – Square. For Two Cut – Plumb and Two Cut – Square, specify a value for Fascia Depth between zero and the thickness of the roof.

Special Project