How do you edit a pad in Revit?

Where is the building pad in Revit?

Add a Building Pad

  1. Open a site plan view.
  2. Click Massing & Site tab Model Site panel (Building Pad).
  3. Use the drawing tools to sketch the building pad as a closed loop.
  4. On the Properties palette, set the Height Offset From Level and other building pad properties as needed.

How do you make a pad in Revit?

To create a pad element, click the Massing and Site tab, and select the Building Pad tool. Building pads are sketch-based elements, so Revit switches to sketch mode. Select a sketching tool from the Draw panel to create your sketch.

What is a pad in Revit?

You add a building pad by sketching a closed loop on a toposurface. After sketching the pad, you can specify a value to control the height offset from the level and other properties. … You then sketch a pad on the surface at an offset of –20 meters from the surface.

How do you delete a building pad in Revit?

Select the split surface and press[Delete] on your keyboard to remove the segment.

How do you add a ground in Revit?

Create a Toposurface by Placing Points

  1. Open a 3D view or a site plan view.
  2. Click Massing & Site tab Model Site panel (Toposurface).
  3. On the Options Bar, set a value for Elevation. …
  4. Next to the Elevation text box, select one of the following: …
  5. Click in the drawing area to place points. …
  6. Click (Finish Surface).
IT IS INTERESTING:  What is a DWG file used for?

What is a building pad?

Building pad means the area occupied by a building or buildings on a building site, including the open area contiguous to and surrounding such buildings and having a slope not greater than ten percent. … Building pad means a relatively level site prepared by grading and upon which a building will be placed.

How do you add a building to a website in Revit?

Create the Site Plan

  1. Define site settings. …
  2. Create the toposurface. …
  3. Rotate the project to True North. …
  4. Specify property lines. …
  5. Add a building pad. …
  6. Grade the toposurface. …
  7. Create parking lots, roads, and sidewalks. …
  8. Add site components.

How do you cut and fill topography in Revit?

View the Cut/Fill Volumes

  1. Create a toposurface.
  2. In the site plan view, select the toposurface.
  3. On the Properties palette, set Phase Created to a phase earlier than the view’s phase. …
  4. Optional. …
  5. Click (Finish Surface).
  6. Select the toposurface copy.
Special Project