Question: How do you use the revolve tool in Revit?

To make changes to the revolve form, select the revolve in the canvas, and click Edit Revolve. Changes can now be made to the boundary or axis sketch. With the revolve selected, the Start Angle and End Angle of the revolve can be adjusted and the material and visibility parameters of the revolve controlled.

What is a revolve tool?

About the Revolve Feature. Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material.

How do you make a void revolve in Revit?

To make changes to the revolve form, select the revolve in the canvas, and click Edit Revolve. Changes can now be made to the boundary or axis sketch. With the revolve selected, the Start Angle and End Angle of the revolve can be adjusted and the material and visibility parameters of the revolve controlled.

How do you make a cone in Revit?

To Create a Cone Mass Element

  1. On the Massing tool palette, select the Cone tool. …
  2. Specify the insertion point of the Cone.
  3. Drag the cursor and specify the radius of the Cone.
  4. Drag the cursor and specify the height of the Cone.
  5. Enter a rotation angle, or press Enter to accept the default angle of 0.
IT IS INTERESTING:  How do I insert a data link in AutoCAD?

What revolve tool helps to do?

ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.

How do you revolve in Autocad?

To revolve as a surface, follow the below steps:

  1. Type REV or revolve on the command line or command prompt and press Enter.
  2. Type M or mode on the command line < press Enter.
  3. Type Surface or S on the command line < press Enter. Select the object to revolve with a small square cursor, as shown below:

What does the revolve tool do in Fusion 360?

Fusion 360’s revolve tool is capable of creating surface features. The profile will be an open profile that will have complete dimensions that are linear. The centerline to the right of the open profile is a construction line that also mimics the linear dimensions placed on the right.

What are the two components necessary for creating a revolve feature?

There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only.



Specify an Operation:

  • Join . Adds the volume created by the revolved feature to another feature or body. …
  • Cut . …
  • Intersect . …
  • New Solid .

Where is revolve in SolidWorks?

Revolved Cut (Features toolbar) or Insert > Cut > Revolve. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

Special Project