What does WD mean on a floor plan?

WIC — Walk-in closet. W — Window or washer. WD — Window. WH — Water heater.

What are the various symbols in a floor plan?

Here are the six most common types of symbols you will find on floor plans (versus other types of plans).

  1. Compass. The north arrow tells you about the orientation of the property. …
  2. Stairs. Stairs are customarily indicated by parallel lines with their measurements. …
  3. Doors. …
  4. Windows. …
  5. Walls. …
  6. Appliances.

What do the numbers mean on a floor plan?

When reading the floor plans, you will probably notice a few circles with numbers and letters inside of them. These symbols are used to indicate a cross-section of that particular room or space that can be found elsewhere in the blueprints.

What does T in a circle mean on floor plans?

Electrical Symbols



A small circle bisected by two parallel lines is a wall outlet, while a circle superimposed over an X is a ceiling light and a T hanging from a circle is a thermostat.

How thick are walls on a floor plan?

Wall thickness varies depending on the construction method of the walls. The internal walls are usually about 4 to 12 inches thick and the external walls about 6 to12 inches.

Why are floor plans important?

They provide a way to visualize how people will move through the space. Floor plans makes it easier to check if the space is suitable for its intended purpose, work through any potential challenges and redesign before moving forward into more elaborate planning or building stages.

IT IS INTERESTING:  How do you color plan in Revit?

Who uses floor plans?

In general, it is a drawing with scale sizes that feature the placing of rooms, fittings, and furniture observed from above. Architects and designers usually use floor plans to turn ideas into visuals and get a clear understanding of what will come out in the end.

Can I draw my own house plans?

It doesn’t take much in the way of resources to draw up your own house plans just access to the Internet, a computer and a free architectural software program. If you prefer the old-school method, you’ll need a drafting table, drafting tools and large sheets of 24-by-36-inch paper to draft the plans by hand.

Special Project