How extend and trim in AutoCAD?

Holding down the “Shift” key will enable the command to be reversed, “Extend” in the case of “Trim”, and “Trim” in the case of “Extend”.

How do you extend in AutoCAD?

To Extend an Object

  1. Click Home tab Modify panel Extend. Find.
  2. Select the objects to serve as boundary edges. Press Enter when you finish selecting the boundary edges. …
  3. Select the objects to extend and press Enter a second time when you finish selecting the objects to extend.

How Use trim and extend command?

You can extend objects so that they end precisely at boundary edges defined by other objects. In this example, you extend the lines precisely to a circle, which is the boundary edge. Note: You can trim objects without exiting the EXTEND command. Press and hold Shift while selecting the objects to be trimmed.

How do you trim in AutoCAD?

To Trim an Object

  1. Click Home tab Modify panel Trim. Find.
  2. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. …
  3. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
IT IS INTERESTING:  Quick Answer: What is a 4 tier architecture?

Is it possible to use trim and extend command simultaneously in AutoCAD?

Yes, you need to use a FENCE when selecting the lines to trim or extend. objects at once. > Daniel J. Altamura, R.A.

What is the difference between trim and extend command?

Extending operates the same way as trimming. You can extend objects so they end precisely at boundary edges defined by other objects. In this example, you extend the lines precisely to a circle, which is the boundary edge.

What is the use of TRIM command?

A trim command (known as TRIM in the ATA command set, and UNMAP in the SCSI command set) allows an operating system to inform a solid-state drive (SSD) which blocks of data are no longer considered to be ‘in use‘ and therefore can be erased internally. Trim was introduced soon after SSDs were introduced.

How do I fix trim in AutoCAD?

Use one of these solutions:

  1. Check if the PICKADD variable is set to 2. …
  2. Pre-select the elements and then call the TRIM command.
  3. Enter TRIM Command once in the command line and then hit enter again before using the TRIM.
  4. Reset the application to defaults. …
  5. Open the drawing in a blank DWG file in your version of AutoCAD.

What is the use of TRIM command and its shortcut key?

Trims objects to meet the edges of other objects. To trim objects, select the boundaries and press Enter. Then select the objects that you want to trim.

What are 3 important properties for any drawing object?

Object properties control the appearance and behavior of objects, and are used to organize a drawing. Every object has general properties including its layer, color, linetype, linetype scale, lineweight, transparency, and plot style. In addition, objects have properties that are specific to their type.

IT IS INTERESTING:  Frequent question: Why do architects draw their designs using scaled down drawings?

What is the difference between stretch and extend command in AutoCAD?

The two commands are very different. Extends objects to meet the edges of other objects. Select several objects to stretch. The command line will prompt you for information and this is the easiest way to find out how a new command works.

What is difference between erase and trim in AutoCAD?

As verbs the difference between trim and erase



is that trim is to reduce slightly; to cut; especially, to remove excess; eg ‘trim a hedge’, ‘trim a beard’ the adposition of can be used in present perfect tense to designate the removed part while erase is to remove markings or information.

Special Project